Page 5 - Montage
P. 5
Catalogue 2013 UK_Mise en page 1 24/05/13 08:55 Page46
RINGS & bEARINGS LOcKERS
FIXPRESS 310 FIXMETAL 312
very strong and quick fixing repairing of damaged pieces
Very high resistance for radial, axial Pasty product advised for repairing,
and dynamic stress. Allows to increase without machining, used cylinder-shaped
machining tolerances, advised for gap pieces with high and even irregular gap
from 0,15 mm to 0,25 mm. Can be used (0.25 to 0.5mm). Resists to impacts and
as a very high resistance thread locker vibrations. For bearings' housing gone
with quick setting. Advised for assemblies oval, repairing of shafts with wear
that cannot be dismantled. or scratches. To be used always with
Colour: green ACTIVATEUR 3140.
Manipulation time : 3 to 5 mn
Complete polymerisation time: 6 to 12 h Colour: dark grey
Shearing resistance: >25 N/mm 2 Complete polymerisation time: 24 h
Temperature range: Shearing resistance: >20 N/mm 2
-60 to +150°C (+230°C) Temperature range: -60 to +150°C (230°C)
OTAN OTAN
1310 F3 Bottle 50 ml x 6
1310 F5 Bottle 250 ml x 1
1310 S1 Pail 5 kg x 1 1312 T2 Tube 50 g x 6
P1 P1
XXXXXX XXXXXX
BLOCK BAGUE 314 BLOCK BAGUE 60 313
strong locking - gap < 0.05mm strong locking - medium gap
Fluid resin advised for small gaps. Strong resistance for radial, axial and
Locking of rings, pulleys, bearings... dynamic stresses. Advised for gaps
with a strong resistance to shearing. between 0.15 and 0.25 mm, on
assemblies that are not to be dismantled:
Colour: green driving shaft, gearwheel, pulley...
Setting time: 10 to 25 min on steel
Temperature range: -60 to 150°C Colour: green
OTAN
Setting time: 10 to 25 min on steel
Complete polymerisation time: 12 to 24 h
Temperature range: -60 to +150°C (230°C)
Shearing resistance: > 20 N.mm 2
OTAN
P1
XXXXXX
1314 F3 Bottle 50 ml x 6 OTAN OTAN
1314 F5 Bottle 250 ml x 1
1313 F3 Bottle 50 ml x 6
PMUC 6314 F3 Bottle 50 ml x 6 1313 F5 Bottle 250 ml x 1
P1
XXXXXX
P1 P1
XXXXXX XXXXXX
BLOCK OIL TOLERANT 316 BLOCK ROULEMENT 318 BLOCK ROULEMENT 60 317
high resistance "oil tolerant" medium resistance - gap < 0.05mm medium resistance - medium gap
For application on pieces where Fixing of pieces that can be dismantled Fixing of pieces that can be dismantled
degreasing cannot be perfect. with standard tooling in case of wear. with standard tooling. Fitting reinforcement
Advised for gaps <0.15mm. Fixing of rings, Fittings reinforcement. Increase assemblies for gaps between 0.15 and 0.25mm.
inserts, pulleys, bearings, cylinder locks... reliability. Increase assemblies reliability. Fixing of
with a strong resistance to shearing. bearing on shafts or housed bearings,
Colour: red locks, inserts, rings, pulleys...
Colour: green Setting time: 10 to 25 mn on steel
Setting time: 10 to 25 min on steel Complete polymerisation time: 12 to 24 h Colour: red
Compete polymerisation time: 10 to 24 h Temperature range: -60 to 150°C (230°C) Setting time: 10 to 25 min on steel
OTAN
Temperature range: -60 to +150°C (+230°C) Shearing resistance: >15 N.mm (24h) Complete polymerisation time: 12 to 24 h
2
Shearing resistance: >15 N/mm 2 Temperature range: -60 to +150°C (230°C)
Shearing resistance: > 15 N.mm 2
P1
XXXXXX
1318 F3 Bottle 50 ml x 6
1316 F3 Bottle 50 ml x 6 1317 F3 Bottle 50 ml x 6
x 1
1316 F5 Bottle 250 ml OTAN PMUC 6318 F3 Bottle 50 ml x 6 1317 F5 Bottle 250 ml x 1
46
P1
XXXXXX
RINGS & bEARINGS LOcKERS
FIXPRESS 310 FIXMETAL 312
very strong and quick fixing repairing of damaged pieces
Very high resistance for radial, axial Pasty product advised for repairing,
and dynamic stress. Allows to increase without machining, used cylinder-shaped
machining tolerances, advised for gap pieces with high and even irregular gap
from 0,15 mm to 0,25 mm. Can be used (0.25 to 0.5mm). Resists to impacts and
as a very high resistance thread locker vibrations. For bearings' housing gone
with quick setting. Advised for assemblies oval, repairing of shafts with wear
that cannot be dismantled. or scratches. To be used always with
Colour: green ACTIVATEUR 3140.
Manipulation time : 3 to 5 mn
Complete polymerisation time: 6 to 12 h Colour: dark grey
Shearing resistance: >25 N/mm 2 Complete polymerisation time: 24 h
Temperature range: Shearing resistance: >20 N/mm 2
-60 to +150°C (+230°C) Temperature range: -60 to +150°C (230°C)
OTAN OTAN
1310 F3 Bottle 50 ml x 6
1310 F5 Bottle 250 ml x 1
1310 S1 Pail 5 kg x 1 1312 T2 Tube 50 g x 6
P1 P1
XXXXXX XXXXXX
BLOCK BAGUE 314 BLOCK BAGUE 60 313
strong locking - gap < 0.05mm strong locking - medium gap
Fluid resin advised for small gaps. Strong resistance for radial, axial and
Locking of rings, pulleys, bearings... dynamic stresses. Advised for gaps
with a strong resistance to shearing. between 0.15 and 0.25 mm, on
assemblies that are not to be dismantled:
Colour: green driving shaft, gearwheel, pulley...
Setting time: 10 to 25 min on steel
Temperature range: -60 to 150°C Colour: green
OTAN
Setting time: 10 to 25 min on steel
Complete polymerisation time: 12 to 24 h
Temperature range: -60 to +150°C (230°C)
Shearing resistance: > 20 N.mm 2
OTAN
P1
XXXXXX
1314 F3 Bottle 50 ml x 6 OTAN OTAN
1314 F5 Bottle 250 ml x 1
1313 F3 Bottle 50 ml x 6
PMUC 6314 F3 Bottle 50 ml x 6 1313 F5 Bottle 250 ml x 1
P1
XXXXXX
P1 P1
XXXXXX XXXXXX
BLOCK OIL TOLERANT 316 BLOCK ROULEMENT 318 BLOCK ROULEMENT 60 317
high resistance "oil tolerant" medium resistance - gap < 0.05mm medium resistance - medium gap
For application on pieces where Fixing of pieces that can be dismantled Fixing of pieces that can be dismantled
degreasing cannot be perfect. with standard tooling in case of wear. with standard tooling. Fitting reinforcement
Advised for gaps <0.15mm. Fixing of rings, Fittings reinforcement. Increase assemblies for gaps between 0.15 and 0.25mm.
inserts, pulleys, bearings, cylinder locks... reliability. Increase assemblies reliability. Fixing of
with a strong resistance to shearing. bearing on shafts or housed bearings,
Colour: red locks, inserts, rings, pulleys...
Colour: green Setting time: 10 to 25 mn on steel
Setting time: 10 to 25 min on steel Complete polymerisation time: 12 to 24 h Colour: red
Compete polymerisation time: 10 to 24 h Temperature range: -60 to 150°C (230°C) Setting time: 10 to 25 min on steel
OTAN
Temperature range: -60 to +150°C (+230°C) Shearing resistance: >15 N.mm (24h) Complete polymerisation time: 12 to 24 h
2
Shearing resistance: >15 N/mm 2 Temperature range: -60 to +150°C (230°C)
Shearing resistance: > 15 N.mm 2
P1
XXXXXX
1318 F3 Bottle 50 ml x 6
1316 F3 Bottle 50 ml x 6 1317 F3 Bottle 50 ml x 6
x 1
1316 F5 Bottle 250 ml OTAN PMUC 6318 F3 Bottle 50 ml x 6 1317 F5 Bottle 250 ml x 1
46
P1
XXXXXX
