Page 6 - Montage
P. 6
Catalogue 2013 UK_Mise en page 1 24/05/13 08:55 Page47
THREAdEd SEALS
TUBELOCK EXTRA 077 TUBELOCK TEFLON ® 334 HYDRAULOCK 329
connections and taps sealant with easy dismantling hydraulic and pneumatic
Sealing of metallic pipes and threaded Paste for pipes and connections up to 3 Low resistant sealing gasket for pneumatic
connections up to 3 inches for quick inches. It's Teflon provides a lubricant and hydraulic thread connections up to
®
putting in service with medium dismantling effect that eases the assembly 3/4 inch. Resists shocks, vibrations, most
resistance. Sealing within a few minutes and the dismantling, including in places gas and fluids, hot and cold water...
at low pressure. Resists most chemicals. difficult to access. Easy dismantling with standard tooling.
Quick setting on steel and brass, Substitutes pastes and tapes for all pipes,
for stainless steel, use ACTIVATEUR 3140. Colour: blue connections,... in plumbing, for heating
Handling time: 5 to 20 min on steel elements, mechanic...
Complete polymerisation time: 12 to 24 h Complete polymerisation time: 12 to 24 h
Temperature range: -60 to +150°C (+230°C) Temperature range: -60 to +150°C (+230°C) Colour: brown
Break resistance: 10 – 20 N.m Break resistance: 1 to 8 N.m Handling time: 10 to 25 min on steel
Colour: Complete polymerisation time: 12 to 24 h
yellow-orange Temperature range: -60 to +150°C (+230°C)
Break resistance: 5 – 15 N.m
1329 F3 Bottle 50 ml x 6
1077 F7 Squeeze bottle 50 ml x 6 1334 T2 Tube 50 ml x 6 1329 F5 Bottle 250 ml x 1
OTAN
HYDRAUBLOCK 326 ETANCHELOCK 322
XXXXXX P1
small diameter pipes sealing by penetration
Sealing of metallic pipes and thread Very fluid adhesive that will penetrate
connections up to 3/4 inch, with medium through capillarity in threads, between
resistance to dismantling. Resists shocks, cylindrical parts and in metal porosity.
vibrations, most gas and fluids, hot and Maximum gap: 0.1mm.
cold water... Easy dismantling with For thread locking, bearings and rings
standard tooling. Substitutes pastes fixing, or post-mounting sealing when
and tapes for all pipes, connections, ... adhesive application is not possible
in plumbing, for heating elements, before the assembly.
mechanic...
Colour: green
Colour: red Handling time: 10 to 30 min
Handling time: 10 to 25 min Complete polymerisation time: 12 to 24 h
Complete polymerisation time: 12 to 24 h Temperature range: -60 to +150°C (+230°C)
Temperature range: -60 to +150°C (+230°C) Break resistance: >20 N.m.
Break resistance: 10 – 20 N.m
1326 F3 Bottle 50 ml x 6 1322 F3 Bottle 50 ml x 6
1326 F5 Bottle 250 ml x 1 1322 F5 Bottle 250 ml x 1
TUBELOCK A 323 TUBELOCK AL 366
big threads food industry
Paste for the sealing of pipes and Sealing of metallic pipes and threaded
hydraulic connections with big diameter, connections up to 3 inches for a quick
with medium resistance. Possible putting in service with medium
dismantling with standard tooling without dismantling resistance. Quick setting
damaging threads. Substitutes pastes on steel and brass. Substitutes pastes
and tapes for all pipes, connections, ... and tapes for all pipes, connections, ...
in plumbing, for heating elements, in food industry.
mechanic...
Colour: yellow OTAN
Colour: red Complete polymerisation time: 12 to 24 h
Handling time: 3 to 15 min Temperature range: -60 to +150°C (+230°C)
Complete polymerisation time: 12 to 24 h Break resistance: 10 – 20 N.m
Temperature range: -60 to +150°C (+230°C)
Break resistance: 5 – 15 N.m
InS Registered
1323 F7 Squeeze bottle 50 ml x 6
1323 T4 Tube 200 ml x 2 1366 F7 Squeeze bottle 50 ml x 6 P1
XXXXXX
47
THREAdEd SEALS
TUBELOCK EXTRA 077 TUBELOCK TEFLON ® 334 HYDRAULOCK 329
connections and taps sealant with easy dismantling hydraulic and pneumatic
Sealing of metallic pipes and threaded Paste for pipes and connections up to 3 Low resistant sealing gasket for pneumatic
connections up to 3 inches for quick inches. It's Teflon provides a lubricant and hydraulic thread connections up to
®
putting in service with medium dismantling effect that eases the assembly 3/4 inch. Resists shocks, vibrations, most
resistance. Sealing within a few minutes and the dismantling, including in places gas and fluids, hot and cold water...
at low pressure. Resists most chemicals. difficult to access. Easy dismantling with standard tooling.
Quick setting on steel and brass, Substitutes pastes and tapes for all pipes,
for stainless steel, use ACTIVATEUR 3140. Colour: blue connections,... in plumbing, for heating
Handling time: 5 to 20 min on steel elements, mechanic...
Complete polymerisation time: 12 to 24 h Complete polymerisation time: 12 to 24 h
Temperature range: -60 to +150°C (+230°C) Temperature range: -60 to +150°C (+230°C) Colour: brown
Break resistance: 10 – 20 N.m Break resistance: 1 to 8 N.m Handling time: 10 to 25 min on steel
Colour: Complete polymerisation time: 12 to 24 h
yellow-orange Temperature range: -60 to +150°C (+230°C)
Break resistance: 5 – 15 N.m
1329 F3 Bottle 50 ml x 6
1077 F7 Squeeze bottle 50 ml x 6 1334 T2 Tube 50 ml x 6 1329 F5 Bottle 250 ml x 1
OTAN
HYDRAUBLOCK 326 ETANCHELOCK 322
XXXXXX P1
small diameter pipes sealing by penetration
Sealing of metallic pipes and thread Very fluid adhesive that will penetrate
connections up to 3/4 inch, with medium through capillarity in threads, between
resistance to dismantling. Resists shocks, cylindrical parts and in metal porosity.
vibrations, most gas and fluids, hot and Maximum gap: 0.1mm.
cold water... Easy dismantling with For thread locking, bearings and rings
standard tooling. Substitutes pastes fixing, or post-mounting sealing when
and tapes for all pipes, connections, ... adhesive application is not possible
in plumbing, for heating elements, before the assembly.
mechanic...
Colour: green
Colour: red Handling time: 10 to 30 min
Handling time: 10 to 25 min Complete polymerisation time: 12 to 24 h
Complete polymerisation time: 12 to 24 h Temperature range: -60 to +150°C (+230°C)
Temperature range: -60 to +150°C (+230°C) Break resistance: >20 N.m.
Break resistance: 10 – 20 N.m
1326 F3 Bottle 50 ml x 6 1322 F3 Bottle 50 ml x 6
1326 F5 Bottle 250 ml x 1 1322 F5 Bottle 250 ml x 1
TUBELOCK A 323 TUBELOCK AL 366
big threads food industry
Paste for the sealing of pipes and Sealing of metallic pipes and threaded
hydraulic connections with big diameter, connections up to 3 inches for a quick
with medium resistance. Possible putting in service with medium
dismantling with standard tooling without dismantling resistance. Quick setting
damaging threads. Substitutes pastes on steel and brass. Substitutes pastes
and tapes for all pipes, connections, ... and tapes for all pipes, connections, ...
in plumbing, for heating elements, in food industry.
mechanic...
Colour: yellow OTAN
Colour: red Complete polymerisation time: 12 to 24 h
Handling time: 3 to 15 min Temperature range: -60 to +150°C (+230°C)
Complete polymerisation time: 12 to 24 h Break resistance: 10 – 20 N.m
Temperature range: -60 to +150°C (+230°C)
Break resistance: 5 – 15 N.m
InS Registered
1323 F7 Squeeze bottle 50 ml x 6
1323 T4 Tube 200 ml x 2 1366 F7 Squeeze bottle 50 ml x 6 P1
XXXXXX
47
