Page 7 - Montage
P. 7
Catalogue 2013 UK_Mise en page 1 24/05/13 08:55 Page48
THREAdEd SEALS
JOINT LIQUIDE 331 SEALFLON LIQUIDE 341 SEALFLON PATEUX 340
pipes, with PTFE PTFE tape in liquid form PTFE tape in paste form
PTFE seal for metallic connections, Aqueous fluid containing PTFE. Aqueous paste sealing compound
hydraulic pipes, pneumatic and heating Threads and flanges sealing. Let it dry containing PTFE, that creates a flexible
up to 3 inches when a medium resistance before mounting (can be stoved). seal easy to dismantle. Resists vibrations
to dismantling is required. After drying, leaves a flexible film and chemicals. For thread and flanges
PTFE brings an excellent chemical stability. allowing an easy dismantling and to be sealing. Avoids over thickness.
Eases mounting and dismantling. mounted again later. Avoid over-thick- Immediate sealing on PVC pipes.
ness. Protect threads against seizing. Let it dry before mounting.
Colour: white
Handling time: 20 to 40 min Colour: white Colour: white
Complete polymerisation time: 12 to 24 h Temperature range: -50 to +250°C Temperature range: -50 to +250°C
Temperature range: -60 to +180°C (+230°C) Gap: 0.15 mm maximum Gap: 0.3 mm maximum
Break resistance: 5 – 15 N.m
OTAN
1331 T2 Tube 50 ml x 6 1341 B4 Tin/brush 250 ml x 6 1340 T3 Tube 100 g x 12
1331 T4 Tube 200 ml x 2 1341 S1 Pail 5 l x 2 1340 O2 Drum 20 kg x 1
fLANGES SEALS
P1
XXXXXX
ORAJOINT 324 PORAJOINT 333 OIL SEAL B 345
flange sealant semi flexible flange sealant flexible sealing
Machined mating flanges sealing. Sealing gel with high adhesive power for all Thread, cramps and flanges sealing.
Resist to vibrations, oils, gas and industrial flanges, including vertical flanges. Substitute Can be used on cut gaskets. Easy to use,
fluids. Advised for all flanges with conventional gaskets with complex shapes: quick drying, makes a thin, adhering and
complex shape: pumps housing, motors, pumps housing, motors, gear boxes... resistant film. Very sticky on all materials.
OTAN
gearbox... A short drying is advised before
Temperature range: -60 to +150°C (+230°C) mounting. Resist oils, gas, water, steam...
Handling time: 15 to 35 min Shearing resistance: >15 N/mm 2
OTAN
Complete polymerisation time: 12 to 24 h Setting time at 20°C: 10 to 35 min Colour: green after drying
Temperature range: -60 to + 180°C (+230°C) Colour: red Temperature range: -50 to +150°C
Shearing resistance: > 5 N/mm 2
Colour: red P1
XXXXXX
1333 C3 Cartridge 300 g x 12
OTAN
1333 E4 Syringe 25 ml x 12
P1
XXXXXX
1324 T2 Tube 50 ml x 6 1333 T2 Tube 50 ml x 6
1324 T4 Tube 200 ml x 2 1333 T4 Tube 200 g x 2
PMUC 6324 T2 Tube 50 g x 6 PMUC 6333 T2 Tube 50 g x 6 1345 B3 Tin/brush 250 g x 6
P1
XXXXXX
48
THREAdEd SEALS
JOINT LIQUIDE 331 SEALFLON LIQUIDE 341 SEALFLON PATEUX 340
pipes, with PTFE PTFE tape in liquid form PTFE tape in paste form
PTFE seal for metallic connections, Aqueous fluid containing PTFE. Aqueous paste sealing compound
hydraulic pipes, pneumatic and heating Threads and flanges sealing. Let it dry containing PTFE, that creates a flexible
up to 3 inches when a medium resistance before mounting (can be stoved). seal easy to dismantle. Resists vibrations
to dismantling is required. After drying, leaves a flexible film and chemicals. For thread and flanges
PTFE brings an excellent chemical stability. allowing an easy dismantling and to be sealing. Avoids over thickness.
Eases mounting and dismantling. mounted again later. Avoid over-thick- Immediate sealing on PVC pipes.
ness. Protect threads against seizing. Let it dry before mounting.
Colour: white
Handling time: 20 to 40 min Colour: white Colour: white
Complete polymerisation time: 12 to 24 h Temperature range: -50 to +250°C Temperature range: -50 to +250°C
Temperature range: -60 to +180°C (+230°C) Gap: 0.15 mm maximum Gap: 0.3 mm maximum
Break resistance: 5 – 15 N.m
OTAN
1331 T2 Tube 50 ml x 6 1341 B4 Tin/brush 250 ml x 6 1340 T3 Tube 100 g x 12
1331 T4 Tube 200 ml x 2 1341 S1 Pail 5 l x 2 1340 O2 Drum 20 kg x 1
fLANGES SEALS
P1
XXXXXX
ORAJOINT 324 PORAJOINT 333 OIL SEAL B 345
flange sealant semi flexible flange sealant flexible sealing
Machined mating flanges sealing. Sealing gel with high adhesive power for all Thread, cramps and flanges sealing.
Resist to vibrations, oils, gas and industrial flanges, including vertical flanges. Substitute Can be used on cut gaskets. Easy to use,
fluids. Advised for all flanges with conventional gaskets with complex shapes: quick drying, makes a thin, adhering and
complex shape: pumps housing, motors, pumps housing, motors, gear boxes... resistant film. Very sticky on all materials.
OTAN
gearbox... A short drying is advised before
Temperature range: -60 to +150°C (+230°C) mounting. Resist oils, gas, water, steam...
Handling time: 15 to 35 min Shearing resistance: >15 N/mm 2
OTAN
Complete polymerisation time: 12 to 24 h Setting time at 20°C: 10 to 35 min Colour: green after drying
Temperature range: -60 to + 180°C (+230°C) Colour: red Temperature range: -50 to +150°C
Shearing resistance: > 5 N/mm 2
Colour: red P1
XXXXXX
1333 C3 Cartridge 300 g x 12
OTAN
1333 E4 Syringe 25 ml x 12
P1
XXXXXX
1324 T2 Tube 50 ml x 6 1333 T2 Tube 50 ml x 6
1324 T4 Tube 200 ml x 2 1333 T4 Tube 200 g x 2
PMUC 6324 T2 Tube 50 g x 6 PMUC 6333 T2 Tube 50 g x 6 1345 B3 Tin/brush 250 g x 6
P1
XXXXXX
48
